市面上的灌膠機的分類有哪些？
如今市面上灌膠機的分類有哪些?
What are the classifications of glue filling machines on the market today?
一，從產能上來分，有半自動灌膠機，自動灌膠機，全自動灌膠機。
First, from the production capacity, there are semi-automatic glue filling machine, automatic glue filling machine, automatic glue filling machine.
半自動灌膠機不帶機械手，有的又叫三軸舉措平臺，因些半自動灌膠機不能走途徑，半自動灌膠機配有一個腳踏開關，產物灌完一個拿走一個，但凡環境下共同流水線應用，員工坐在流水線旁邊，將灌完的產物放到流水線上保送到下一個工序，操作起來也很是的精練。
Semi-automatic glue-filling machine does not have a manipulator, or a three-axis platform, because some semi-automatic glue-filling machine can not walk the way, semi-automatic glue-filling machine is equipped with a foot switch, product filling one takes one away, but where the environment of common pipeline applications, employees sit next to the pipeline, the finished product will be put on the pipeline to ensure the next process, the operation is also very precise. Practice.
半自動灌膠機
Semi-automatic glue filling machine
自動灌膠機帶有一個三軸舉措平臺，機械手可走各類直線，三維途徑，應用自動灌膠機灌膠時，但凡做一個卡板，將產物的成排的擺放好，然后將卡板放到平臺上，三軸機械手將依照編程指定好的途徑一次性將卡板上的產物全部灌完，同半自動灌膠機比照，操作員不需求每灌一個產物就拿一次，節約了擺放時間，機械擱淺時間，效率相對有所進步。
The automatic glue filling machine has a three-axis action platform. The manipulator can walk all kinds of straight lines and three-dimensional ways. When using the automatic glue filling machine to glue, if a card is made, the rows of products are arranged well, and then the card is put on the platform. The three-axis manipulator will fill all the products on the card at one time according to the programming method, and compare with the semi-automatic glue filling machine. It does not need to take every product for irrigation, which saves the time of placing, the time of mechanical stranding, and the efficiency is relatively improved.
但關于很是大的產物灌膠的話，有時半自動灌膠機緣斗勁適宜，究了局自動灌膠機Z軸高度是有限制的，普通Z軸間隔臺面的高度在100-150MM，當產物的高度超出范圍時，自動灌膠機就不適宜了。
But when it comes to the filling of large products, sometimes the edge of semi-automatic filling machine is suitable. The Z-axis height of local automatic filling machine is limited. The height of common Z-axis interval table is 100-150MM. When the height of products exceeds the range, the automatic filling machine is not suitable.
自動灌膠機
Automatic glue filling machine
全自動灌膠機我們又叫做灌膠機流水線，機械自動上料自動下料，自動灌膠，自動進烤箱完成固化，產能出格高，一次性可節約多個人工，應用全自動灌膠機流水線，一次性投入相對也斗勁大，依照工藝復雜水平從幾十萬到上百萬不等，所以全自動灌膠機普通斗勁大的公司，訂單很充分的公司常常選擇的會斗勁多。 全自動灌膠機
Full-automatic glue filling machine is also called glue filling machine assembly line, automatic feeding and feeding, automatic glue filling, automatic curing in oven, high productivity, one-time can save a lot of labor, the application of full-automatic glue filling machine assembly line, one-time investment is relatively strong, according to the complex level of technology from hundreds of thousands to millions, so the full-automatic glue filling machine is generally competitive. Big companies, companies with ample orders, often choose to be more aggressive. Fully automatic glue filling machine
二，從灌膠的嚴厲水平來分
Second, according to the strict level of glue filling
非真空灌膠機，半真空灌膠機，真空灌膠機;真空灌膠機斗勁復雜，普通用于汽車線圈灌膠，整個灌膠環境都是在真空環境下，由于汽車線圈不能有一點氣泡存在，全真空的環境下，才干到達此要示，避但全真空灌膠機效率斗勁底，由于要對膠水抽真空，還要對真空腔體抽真空，而且灌膠速度又不能快，灌膠速度太快也會發作氣泡，所以真空灌膠機普通用于對質量請求很是嚴厲的產物。半真空灌膠機普通只對膠水停止抽真空措置，去除膠水中的氣泡，此刻半真空灌膠機就是由灌膠機加一個真空泵構成，真空泵接到料桶的接口，對膠水脫泡，從而降低氣泡的發作。
Non-vacuum filling machine, semi-vacuum filling machine, vacuum filling machine; Vacuum filling machine has complex bucket strength, which is commonly used for automobile coil filling. The whole filling environment is in vacuum environment. Because there is no bubble in automobile coil, it is only in full vacuum environment that this indication can be reached. The efficiency of all-vacuum filling machine can be avoided, but the bucket strength of all-vacuum filling machine is low because of vacuum pumping of glue. Cavity vacuum, and the filling speed can not be fast, the filling speed is too fast will also produce bubbles, so the vacuum filling machine is commonly used for quality requirements are very strict products. Semi-vacuum glue filling machine usually only vacuum the glue and remove bubbles in the glue. Now the semi-vacuum glue filling machine is composed of a glue filling machine and a vacuum pump. The vacuum pump connects to the barrel and defoams the glue so as to reduce the occurrence of bubbles.
三，從工藝上來分
Third, from the point of view of Technology
顯現屏模組灌膠機，硬燈條灌膠機(機身斗勁長，普通在一米六以上，由于硬燈條通用長規格一米五)，軟燈條灌膠機(整個灌膠機行程中長的，機長普通在六米多，由于一根軟燈條長度要么五米，要么六米，思索到兼容，普通行程做到六米，整個機身長度會在六米多七米的樣子)，電子線圈灌膠機，球泡燈灌膠機，表貼屏灌膠機。
Display screen module glue-filling machine, hard lamp glue-filling machine (the fuselage is strong, usually more than 1.6 meters, because the longest specification of hard lamp is 1.5 meters), soft lamp glue-filling machine (the longest travel of the whole glue-filling machine, the captain of the machine is usually more than 6 meters), because a soft lamp length is either five meters or six meters, considering compatibility, the general travel is six meters, the whole fuselage length will be six meters. The shape of up to seven meters), electronic coil glue filling machine, bulb lamp glue filling machine, surface mounting screen glue filling machine.
四，從灌膠精度來分
Fourth, according to the accuracy of glue filling
步進灌膠機，伺服灌膠機，伺服灌膠機經由過程伺服加絲桿的方式，在舉措的過程中累計誤差會很是的低，普通用于高精度灌膠，步進灌膠機經由過程步進電機加皮帶的方式，在舉措的過程中誤差會不竭的累積，所以精度要低一點。
Step-by-step glue-filling machine, servo glue-filling machine, servo glue-filling machine through the way of servo-adding screw, the cumulative error in the process of action will be very low, commonly used for high-precision glue-filling, step-by-step glue-filling machine through the way of stepping motor and belt, in the process of action, the error will accumulate endlessly, so the accuracy will be lower.
五，從灌膠量上來分
Fifth, according to the amount of glue filling
有分為微量灌膠機，灌膠量在一克以下，中量灌膠機1-20克以大，大流量灌膠機20克到幾百克不等。灌膠量越小，機械越難做，膠量越大，反而要好做一些。
There are micro-filling machine, filling less than one gram, medium filling machine 1-20 grams to large, large flow filling machine 20 grams to several hundred grams. The smaller the amount of glue filling, the more difficult the machine is to do, and the larger the amount of glue, on the contrary, it is better to do some.
上一篇：雙組份打膠機的性能介紹！
下一篇：打膠精度與打膠機出膠量之間有什么關系！
